LED Beleuchtung für Innebereiche wie z.B. Einkaufszentren

LED fixtures reduce maintenance costs

In contrast to traditional kinds of lighting, LED fixtures must be replaced or maintained significantly less frequent. The rarer the fixture needs to be maintained, the higher the maintenance factor. In most cases, the maintenance factor is characterized by values ​​between 0.6 and 0.8 at 50,000 hours of operati

Cost factor maintenance

I save energy develops LED fixtures, which are characterized by a maintenance factor as high as possible. This means that our fixtures provide the required power much longer and must be replaced far later. The maintenance factor of our LED fixtures usually ranges between 0.8 and 0.9 with a lifespan of 50000 hours.

Example: An operating time of 50,000 hours with a light degradation of L80 does not mean that the LED fixture fails or is broken — it signifies that that the LED fixture delivers "only"  80% of the initial luminous flux after 50,000 hours of burning time. Thus a lumen depreciation of only  20% is achieved.

LED lights minimize replacement costs

HME fixtures, that are still used frequently, must be replaced after 5,000 to 10,000 operating hours. Our LED fixtures with a maintenance factor of L80 can be deployed up to ten times longer than conventional HME fixtures.

As regards indoor lighting, the maintenance of the lighting system is an important cost factor. LED fixtures help to reduce the maintenance costs to a minimum. Downtime in production and the cost of labor and fixture replacement do not apply for many years.